I-O Data Device HDC-UXW Uživatelský manuál stáhnout pdf

●Example for Windows XP

●Example for Windows 2000

B-MANU200694-01

HDC-UXW Series

Setup Guide for Windows

If you connect the drive to the computer with eSATA cable

If you connect the drive to the computer with USB cable

If you have connected the drive to the computer with eSATA cable If you have connected the drive to the computer with USB cable

Connect to the computer

Conﬁrmation

Conﬁrm that the icon for the hard disk has been added in [My Computer].

Click on the icon of this drive.

If multiple removable devices are connected, please

make judgment according to the message of drive.

Conﬁrm the message (click on [OK]).

Remove the drive.

Click on the [Removable Tool]

in Task Tray.

Click on the [SATAUnplug] icon in Task Tray.

Conﬁrm the message.

Remove the drive.

●Notice the Direction of Connector

The direction of a connector for connection is ﬁxed.

In case of feeling diﬃcult to make connection, never

force to do it, please make sure the direction of the

connector. If you intend to force to make connection

with a wrong direction, the cable or port shall possibly

be damaged.

●If No Icon for the Drive shown

■Please make sure the connection of the drive.

■Please connect to another USB port .

If the drive is connected to USB hub, please connect

to computer’s USB port.

■Please click on [View] → [Refresh] in [My Computer.]

In case of

Windows XP

In case of

Windows 2000/Me/98

These are icons

The message displayed in the screen shall be diﬀerent based on diﬀerent versions of Windows.

However, the operation procedure is same, please proceed as usual.

【Remove】

Click

The Message [The device ‘xxxxxxxxxxxx’ cannot be stopped ・・・・] Is Displayed.

Clicking on the SATAUnplug Icon, Still the Drive Cannot Be Displayed.

Close all the software you are using, and proceed to remove the drive.

The SATAUnplug does not support the SATA Host Controller of the computer. Please turn oﬀ the power

supply of the computer and proceed to remove the drive.

When You Meet Following Cases…

It is necessary to install the drive Unplug

Utility to remove the drive if the power supply

of the computer is on.

※If you have not installed the drive Unplug Utility, or operate in a

non-support environment, please turn oﬀ the power supply of

the computer and remove the drive.

Notice for Use of the Drive

●When removing a cable, please do not hold the cable portion, but hold the connector.

●Based on the combination with computer, sometimes you may not be allowed

to use power-saving functions such as standby, rest, sleep, suspend, and resume.

●Please do not install application in the drive except that the drive is used as a bootable drive.

●Please notice the following when connecting with USB and using other USB devices:

●The OS cannot be booted from the drive when using USB cable.

●Because Windows and Mac OS, except Mac OS X 10.4, have diﬀerent formattings, you cannot

use the drive under both of these operating systems at the same time.

Because of the programs executed during the start-up of OS not being found and other reasons, you may not use some software

such as word-processing software and game software normally.

■Data transfer speed of the drive may become slower.

■If being connected to USB hub, the drive may not be useable. In such case, please connect the drive to computer's USB port.

※If the same message is displayed again, please turn oﬀ the power supply of the computer and remove the drive.

Click on the displayed message

[Safely remove …… drive(ｘ：)].

Click

※The displayed message depends on the OS you are using.

About Format Operation of the Drive

This drive is already formatted in factory as one partition and FAT32 to use Windows. Besides, the drive

can also be used after reinitialized with NTFS formatting under Windows XP/2000.

However, if using the drive under Mac OS X, you need to initialize. For details, please refer to the “Setup

Guide for Mac OS”.

NTFS Format

■Advantage of NTFS formatting

・Suitable to Windows XP/2000 and Hard Disk can be used eﬀectively.

・Suitable to save large ﬁle size. In FAT32, the maximum size of a ﬁle can only

be less than 4GB.

・There is no limitation to the number of saved ﬁles. In FAT32, the number of ﬁles

in a folder is limited.

■Notice for NTFS formatting

・Once initialized with NTFS formatting, the drive shall not be used under Mac OS X.

Following is an example of connecting eSATA bracket to the SATA port inside the computer. If

SATA port is available in the computer, you do not need to have an eSATA bracket.

（Please remove the drive when you install the Unplug Utility.）

Installation

Insert the Support Software CD into CD-ROM drive.

The Menu shall be displayed automatically.

Click on [Install].

The installation of the Utility shall be started. Please follow the instructions on the screen.

You can use SATAUnplug when you remove the drive connected with eSATA cable to the computer.

Attached Support Software for Windows

You can make installation from the Menu of Support Software.

※Please log on as the computer administrator to install if you use Windows XP/2000.

Hard Disk

FAT32 Formatter

It is a software which resets the drive format to factory default (one partition, FAT32 ).

※Please log on as the computer administrator to use Hard Disk FAT32 Formatter.

※The drive must be connected to the computer with USB cable when you use Hard Disk FAT32 Formatter.

Unplug Utility

“SATAUnplug”

Support Windows XP/2000 Only

It is a software which enables the drive to remove from the computer while the power

supply of the computer is on and the drive is connected to the computer with eSATA

cable.

※In case eSATA brocket is in connected, please use this software under AHCI mode of Intel 910, 915, 925, 945,

955, 965 and 975 chipsets.

Software Name Features

How to read Online Manual

①Insert the Support Software CD into CD-ROM drive.

②Click on the displayed [Online Manual] button.

AC Adaptor

Power Cable

２

３

６

７

４

１

Install the drive Unplug Utility.

For the installation, please refer to [3Installation].

Disconnect the power supply of the computer, and connect eSATA

bracket as shown in and in the ﬁgure.

３

Connect power supply of the computer,

and make connection from to as

shown in the ﬁgure.

※The POWER/ACCESS lamp of this drive shall be

blue while being on.

Connect the power supply of the computer

as shown in the ﬁgure.

※The POWER/ACCESS lamp of this drive shall be blue

while being on.

１

AC Adaptor

Power Cable

USB Cable

Connect to USB Port

Notice

Reference

３

Install the Unplug Utility “SATAUnplug”.

(NOTE) Power cable is varied based on the country.

eSATA Cable

1 2

HDC-UXW Series 1

Shrnutí obsahu

Strany 1 - HDC-UXW Series

●Example for Windows XP●Example for Windows 2000B-MANU200694-01HDC-UXW SeriesSetup Guide for Windows If you connect the drive to the computer with eS

Strany 2

HDC-UXW SeriesSetup Guide for Mac OS1Connect to the computer１23If you connect the drive to the computer with USB cableUncheck [File Exchange] (remove

Komentáře k této Příručce

Žádné komentáře

I-O Data Device HDC-UXW Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Externí pevné disky I-O Data Device HDC-UXW. I-O Data Device HDC-UXW User's Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce